Filter
Top Products
Chapter 4 Replacement Procedures
Satellite T130, Satellite Pro T130, and PORTEGE T130Maintenance Manual (960-Q08)
4-38
Installing the cover assembly
The following describes the procedure for installing the cover assembly.
1. Install the cover assembly to the base assembly.
NOTE: Be careful not to catch the cables between cover assembly and base assembly.
2. Connect the touch pad flat cable to the connector on the system board.
3. Secure the cover assembly with the following screws from the back and bottom of
computer.
M2-0.42 FLAT BIND screw Back x6
M2.56.5 FLAT BIND screw Back x2
M2.05.0 FLAT BIND screw Back x11
4. Free the cable from cable-drain when through the antenna cable to PCB hole.