Filter
Top Products
Chapter 4 Replacement Procedures
4.9 Cover Assembly
Removing the cover assembly
The following describes the procedure for removing the cover assembly (See Figure 4-9-1 to
4-9-3).
1. Turn over the computer.
2. Remove the following screws securing the cover assembly from the back and bottom
of computer.
M2-0.42 FLAT BIND screw Back x6
M2.56.5 FLAT BIND screw Back x2
M2.05.0 FLAT BIND screw Back x11
M2-0.4*2 6pcs
M2.5*6.5 2pcs
M2.0*5.0 11pcs
Figure 4-9-1 Remove the screws (back)
Satellite T130, Satellite Pro T130, and PORTEGE T130Maintenance Manual (960-Q08)
4-35