Filter
Top Products
56
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
The computer has two memory slots—Slot A and Slot B. You
can install one or two memory modules.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
If the computer is on, begin at step 1; otherwise, skip to step 3.
1 Click Start, then Turn off computer or Shut Down
(depending on the system).
The Turn off computer or Shut down window appears.
2 Click Turn Off or Shut down.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer, including the AC adaptor.
4 Remove the main battery. For information on removing
the main battery, see “Removing the battery from the
computer” on page 128.
5 Close the display panel and turn the computer upside
down to locate the memory module slot cover.
(Sample Illustration) Locating the memory module slot cover
Memory module
Front of computer
slot cover