Filter
Top Products
User’s Manual 3-15
Hardware, Utilities and Options
TOSHIBA USB Sleep
and Charge Utility
This utility is able to either enable or disable the
USB Sleep and Charge function.
This utility shows the positions of USB ports that
support the USB Sleep and Charge function and
displays the battery's remaining capacity.
To start this utility, click Start -> All Programs ->
TOSHIBA -> Utilities -> USB Sleep and
Charge.
Trusted Platform
Module (TPM)
The TPM (Trusted Platform Module) is a security
encryption device for the hard disk drive. To use
TPM:
1. Enable TPM through the BIOS setup by the
following steps:
1. Turn on the computer while pressing the
ESC key.
2. Press the F1 key when directed.
3. Press the PGDN key.
4. Press the down arrow key until TPM is
highlighted, then press the space bar to
change the TPM status to Enabled.
5. Press the Y key to save the changes.
6. Press END and then press the Y key to
accept the changes. The computer will
restart.
Some models may have Hide TPM as an
option on the BIOS setup screen. If your
system shows Hide TPM, it should be set to
No before you set TPM to Enabled.
Otherwise, you will not be able to change
TPM.
2. Install Infineon TPM Software Professional
Package from Start-> All Programs ->
TOSHIBA -> Applications and Drivers.
3. Perform the TPM configuration. We
recommend that you read the help file of
Infineon TPM software before you do the
TPM initialization. You may refer to the Help
from Start -> All Programs -> Infineon
Security Platform Solution -> Help.