Toshiba TECRA R10 Laptop User Manual


 
User’s Manual 4-5
Operating Basics
Please also refer to the fingerprint utility Help file for more information.
You can start it using the following method:
Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA
Fingerprint Utility. The main screen is displayed. Click ? in the
lower left corner of the screen.
Fingerprint utility limitations
TOSHIBA does not guarantee that the fingerprint utility technology will be
completely secure or error-free, or that it will accurately screen out
unauthorized users at all times. TOSHIBA is not liable for any failure or
damage that might arise out of the use of the fingerprint software.
Setup Fingerprint Registration
Please use the following procedure when first using fingerprint
authentication.
1. Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA
Fingerprint Utility, or click the utility icon in the Task Bar.
2. The Enroll screen is displayed. Enter the current account password
into the Windows Password field. If no Windows password had been
configured, you will be asked to configure the new logon password.
then click Next.
3. Click the non-enrolled finger icon above the finger you want to register
and then click Next.
4. The note for enrollment operation screen is displayed. Confirm the
message and then click Next.
5. The scanning practice screen is displayed. You are able to practice
swiping (three times) your finger to ensure you use the correct method.
When you have finished practicing swiping your finger, click Next.
6. Swipe three times with the same finger. If scanning of fingerprint
succeeds, "Enrollment succeed! Do you want to save this
fingerprint?" message box will appear, click OK.
7. The following message will be displayed: "It is Strongly
recommended you enroll one more fingerprint." Click OK
and repeat steps 3, 4, 5 and 6 with another finger.
The fingerprint sensor compares and analyzes the unique
characteristics in a fingerprint. However, there may be instances where
certain users are unable to register their fingerprints due to insufficient
unique characteristics in their fingerprints.
The recognition success rate may differ from user to user.
The fingerprint authentication uses the same Windows logon ID and
password. If the Windows logon password has not been setup, please
do so before registration.
This sensor has the memory space for at least 20 fingerprint patterns.
You might be able to register more fingerprint patterns depending on
the sensor memory usage.