Filter
Top Products
4-26 User’s Manual
Operating Basics
■ Make sure that your computer is running on AC power when using
WinDVD Creator.
■ Operate the computer at Full Power. Do not use power-saving
features.
■ While you are editing a DVD-Video, you can display previews.
However, if another application is running, the preview might not
display properly.
■ WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
■ WinDVD Creator cannot edit or play copy protected content.
■ Do not change display settings while using WinDVD Creator.
■ Do not enter standby/Hibernation Mode while using WinDVD
Creator.
■ Do not operate WinDVD Creator immediately after turning on the
computer. Please wait until all disk/disc drive activity has stopped.
■ When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
■ CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
■ While recording video to DVD or tape, please close all other
programs.
■ Do not run software like a screen saver because it can put a heavy
load on the CPU.
■ Do not run communication applications like a modem or a LAN.
2. Before recording the video to DVD
■ When you record to DVD discs, please use only media
recommended by TOSHIBA.
■ Do not set the working drive to a slow device like a USB 1.1 hard
disk drive or it will fail to write the DVD.
■ Do not perform any of the following actions:
• Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
• Bump or cause vibration to the computer.
• Use the Mode control button and Audio/Video control button to
reproduce music or voice.
• Open the optical media drive.
• Install, remove or connect external devices, including the
following:
PC card, SD card, ExpressCard, USB devices, external monitor,
i.LINK devices, optical digital devices.
■ Please verify your disc after recording important data.
■ DVD-R/+R/-RW discs cannot be written in VR format.