Filter
Top Products
User’s Manual 4-13
Operating Basics
Inserting a module
Insert the Ultra Slim Bay HDD adaptor as described below.
1. Insert the Ultra Slim Bay HDD adaptor in the computer as shown below
and press until the ejector clicks.
2. If you want to lock the Ultra Slim Bay HDD adaptor, set the Ultra Slim
Bay lock screw in the hole for the lock position (➁). The lock screw is
inserted in the unlock position (➀) at the time of purchasing.
Figure 4-5 Inserting the Ultra Slim Bay HDD adaptor
Using optical media drives
The text and illustrations in this section refer primarily to the optical media
drive. However, operation is the same for other optical drive in the Ultra
Slim Bay. The full-size drive provides high-performance execution of CD/
DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows and the Ultra Slim Bay indicator
glows.
If you have a DVD-ROM&CD-R/RW drive, refer also to the Writing CDs on
DVD-ROM&CD-R/RW drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs/DVDs.
Ultra Slim Bay HDD adaptor
Lock screw
Use the WinDVD application to view DVD-Video discs.
When the power of the optical media drive is off, pressing the Fn + Tab
keys will turn the power of the optical media drive on. Furthermore, it is
possible to set it to turn the power of the optical media drive on and eject
the tray at the same time.