Toshiba PDP002Z Power Supply User Manual


 
E6581343
- 21 -
4.2. The overview of the VF-AS1/PS1 parameter
Refer to a communication functional description (VF-AS1: E6581315/VF-PS1: E6581413)
for details.
4.2.1. FA06 (Command word 1 from internal option PCB)
bit Function 0 1 Note
0 Preset Speed1
1 Preset Speed2
2 Preset Speed3
3 Preset Speed4
OFF ....................0000,
1 - 15 ..................0001 - 1111
Combination of 4 bits.
4 THR1/2
Motor 1
(THR1)
Motor 2
(THR2)
THR1: thr
THR2: f173
5 PI off Normal PI off -
6 ACC1/ACC2
ACC 1
(AD1)
ACC 2
(AD2)
AD1: acc, dec
AD2: f500, f501
7 DC braking OFF DC braking -
8 Jog OFF JOG RUN -
9 Forward/Reverse Fw. Rev. -
10 Run/stop STOP RUN -
11 Free run (ST) Free run -
12 Emergency stop OFF EMG./ Stop Always enable
13 Reset trip OFF Reset -
14 Frequency link OFF Priority Enable in spite of the parameter fmod
15 Command link OFF Priority Enable in spite of the parameter cmod
4.2.2. FA23 (Command word 2 from internal option PCB)
bit Function 0 1 Note
0 Speed/Torque Speed Ctrl. Torque Ctrl. -
1 Clear kwh OFF Clear Clear the value of fe76, fe77
2 (Reserved) - - -
3* Brake Close (BC) Normal Forced Close -
4* Pre magnetic Normal ON -
5* Brake Open (B) Brake Close Brake Open -
6* Brake Answer (BA) Brake Close Brake Open -
7 Fast Stop Normal ON -
8 ACC1/ACC2
9 ACC3/ACC4*
00: Acc. / Dec. 1
01: Acc. / Dec. 2
10: Acc. / Dec. 3*
11: Acc. / Dec. 4*
Combination of 2 bits.
AD1: acc, dec
AD2: f500, f501
AD3: f510, f511*
AD4: f514, f515*
10 THR 1/2
11 THR 3/4*
00: V/f 1
01: V/f 2
10: V/f 3*
11: V/f 4*
Combination of 2 bits.
12* Torque Limit 1/2
13* Torque Limit 3/4
00: Torque limit 1
01: Torque limit 2
10: Torque limit 3
11: Torque limit 4
Combination of 2 bits.
14* Speed Gain 1/2 Gain 1 Gain 2
Gain 1: f460, f461
Gain 2: f462, f463
15 (Reserved) - - -
* These functions are reserved in VF-PS1.