Toshiba PDP002Z Power Supply User Manual


 
E6581343
- 4 -
2.2. PDP002Z Device Data
Parameter Value Note
Vendor_Name "TSIJ" -
Model_Name "PDP002Z" -
Revision "V1.1" -
Ident_Number 0x093C ID number
Protocol_Ident 0 PROFIBUS-DP
Station_Type 0 DP slave
FMS_supp 0 PROFIBUS-FMS: not supported
Hardware_Release "V1.0" -
Software_Release "V1.0" -
9.6_supp 1 9.6kbps: supported
19.2_supp 1 19.2kbps: supported
45.45_supp 1 45.45kbps: supported
93.75_supp 1 93.75kbps: supported
187.5_supp 1 187.5kbps: supported
500_supp 1 500kbps: supported
1.5M_supp 1 1.5Mbps: supported
3M_supp 1 3Mbps: supported
6M_supp 1 6Mbps: supported
12M_supp 1 12Mbps: supported
MaxTsdr_9.6 60 60 bit tiime
MaxTsdr_19.2 60 60 bit tiime
MaxTsdr_45.45 250 250 bit tiime
MaxTsdr_93.75 60 60 bit tiime
MaxTsdr_187.5 60 60 bit tiime
MaxTsdr_500 100 100 bit tiime
MaxTsdr_1.5M 150 150 bit tiime
MaxTsdr_3M 250 250 bit tiime
MaxTsdr_6M 450 450 bit tiime
MaxTsdr_12M 800 800 bit tiime
Redundancy 0 not supported
Repeater_Ctrl_Sig 2 TTL level
24V_Pins 0 not used
Freeze_Mode_supp 1 supported
Sync_Mode_supp 1 supported
Set_Slave_Add_Supp 0 not supported
Auto_Baud_supp 1 supported
Min_Slave_Intervall 1 0.1ms
Fail_Safe 0 mode: not supported
Modular_Station 1 -
Max_Module 1 ID: 1 byte
Max_Input_len 20 Input: 20 bytes
Max_Output_len 20 Output: 20 butes
Max_Data_len 40 Data length: 40 bytes
User_Prm_Data_Len 2 -
Max_User_Prm_Data_Len 2 -