Filter
Top Products
41
11. Pre-catalyser heat shield preparation
1. INSTALL PRE-CATALYSER HEAT SHIELD.
(a) Install the heat shield with the 2 clamps and 4 bolts
onto the catalyser.
K: Catalyser (10-1)
K: Heat insulation No. 2 (10-2)
K: Bolts (4 pcs.) (10-6)
K: Bracket (2 pcs.) (10-3)
Torque: 6 Nm
NOTICE: Ensure clearance between the clamp and
the exhaust tube of 5 mm.
NOTICE: Ensure location is parallel to flange.
K
K
K
K
4x
2x
5 mm
= =