Filter
Top Products
59
18. INSTALL LAMBDA SENSOR NO. 1
(a) Install the lambda sensor into the exhaust manifold.
R: Lambda sensor.
Torque: 44 Nm
19. INSTALL EXHAUST MANIFOLD HEAT SHIELD.
(a) Install the exhaust manifold heat shield onto the
manifold using the 4 bolts .
K: Heat insulation No. 1 (11-1)
K: Bolt (4 pcs.) (11-2)
Torque: 20 Nm
(b) Connect the lambda sensor connector to the vehicle
harness.
(c) Fix the sensor connector to the inlet pipe bracket.
20. INSTALL LAMBDA SENSOR NO..2
(a) Install the lambda sensor into the exhaust manifold.
R: Lambda sensor.
Torque: 44 Nm
R
K
K
K
K
K
R