Filter
Top Products
42
12. Turbo control system preparation
1. TURBO CONTROL SYSTEM PREPARATION.
(a) Install the power control-unit onto the bracket using
the 2 bolts and 2 nuts.
K: Bolt (2 pcs.) (24-2)
K: Control-unit (23-4)
K: Power Control-unit bracket (24-3)
K: Nut (2 pcs.) (24-7)
Torque: 8 Nm
(b) Install the relays onto the bracket using 2 bolts and 2
nuts.
K: Relay (2pcs.) (23-5)
K: Bolt (2 pcs.) (24-9)
K: Nuts (2 pcs.) (24-6)
Torque: 6 Nm
2. INSTALL CONTROL-UNIT HARNESS.
(a) Install the control-unit harness into the control-unit
with the 2 connectors.
K: Control-unit wiring harness No.1 (23-1)
(b) Install the relay connectors into the relays.
K
K
K
K
K
K
KK
K
K
K
K
K