Filter
Top Products
6
PRECAUTIONS
PLEASE READ THOROUGHLY THESE PRECAUTIONS BEFORE INSTALLING THE CHARGER KIT
Do not pinch the rear wring or harness in the tightened
part.
When passing the wires through the dashboard or other
panels, use a grommet to ensure waterproofing.
Protect the wiring with tape when it is passed through a
hole.
When disconnecting a connector, be sure to grip the
connector body. Do not tug on the wiring.
Do not forcibly pull any car wiring harness.
Rough tugging may result in opened connectors, or a
broken wire harness.
After installation, check that all the functions of the car
are normal.
Be sure to disconnect the negative (-) lead from the
battery terminals.
Protect the car with fender covers and so on.
Use the correct tool when tightening bolts and nuts.
After fastening band clamps, cut away all the excess of
the clamps.
Be sure to firmly tighten connectors and terminals.
Before connecting the power wiring to the battery,
check the wiring connectors, harness, etc. to see that
they are properly secured.
Check body and trim near area of installation to be cer-
tain no dirt or scratches resulted from the installation.
During any operation on fuel system, keep away
from fire.
Grommet
Tape
No
OK
–
+