Filter
Top Products
TD-W8900G 54M Wireless ADSL2+ Router User Guide
16
¾ Now, you can run the Ping command in the command prompt to verify the network
connection between your PC and the Router. The following example is in Windows XP
Operating System.
Open a command prompt, From the Start menu on your desktop, select run tab, type cmd in the
field, and type ping 192.168.1.1 on the screen that appears, and then press Enter.
If the result displayed is similar to that shown in figure below, the connection between your PC
and the Router has been established.
Figure 4-13
If the result displayed is similar to that shown in figure below, it means that your PC has not
connected to the Router.
Figure 4-14
Please check it following these steps:
1. If the connection between your PC and the Router is correct?