TP-Link TD-W8900G Network Router User Manual


 
TD-W8900G 54M Wireless ADSL2+ Router User Guide
28
Figure 5-12
1) If you want to adopt the Bridge service, you have to select the Enable Bridge Service
option in the screen above, or else the service will not take effect.
2) Enter the service name in this screen, otherwise leave the default setting.
3) Click the Next button, and you will see the next screen which displays the detailed
settings you’ve made (shown in Figure 5-13). Or else click the Back butt
on to return to
the previ
ous screen to make modifications.
Figure 5-13
4) If you are sure about the configuration, click the Save button to save these settings,
otherwise click the Back button to return to the previous screen to make modifications.
The information of the figure shows above is same as the information in the Figure 5-3.