Filter
Top Products
TD-W8900G 54M Wireless ADSL2+ Router User Guide
33
¾ Virtual Server Table: The table indicates the information about the Virtual Server entries.
Server Name: This is the name of the Virtual Server. It is exclusive and must be filled
in.
External Port Start: The base number of External Ports. You can type a service port or
leave it blank.
External Port End: The end number of External Ports. You can type a service port or
leave it blank.
Protocol: The protocol used for this application, TCP, UDP, or TCP/UDP.
Internal Port Start: The base number of Internal Ports. You can type a service port or
leave it blank.
Internal Port End: The end number of Internal Ports. You can type a service port or
leave it blank.
Server IP Address: The IP Address of the PC providing the service application.
¾ Add: Click the Add button to add a new entry.
¾ Remove: Select the check box in the table (shown in Figure 5-16) and then click the Remov
e
button, then the corresponding entry will be deleted in the table.
To setup a virtual server entry:
1. Click the Add button on the screen above (pop-up Figure 5-16), and then you will set the
new Virtual Server in the
next screen (shown in Figure 5-
17).