Filter
Top Products
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
38
Figure 4-33
¾ Change Policy: There are two policies for the MAC filters: FORWARDED and BLOCKED.
Select the Change checkbox and click the Change Policy button to change from one policy
to another. When you set FORWARDED, it means that all MAC layer frames will be
forwarded except those matching with any of the specified rules in the table (shown in Figure
4-33
). While BLOCKED means that all MAC layer frames will be blocked except those
matching with any of the specified rules in the preceding table.
¾ Add: Click the Add button, and then you can add a new MAC Filter in the next screen (shown
in Figure 4-33).
¾ Remove: Se
lect the check box in the table (shown in Figure 4-33) and then click the Remove
button, and then the corresponding entry will be deleted in the table.
To add a MAC Filtering rule:
1. Click
the Add button in Figure 4-33, and you will see the next screen similar to in Figure 4-34.
Figure 4-34
2. Select Protocol Type in the drop-down list for the rule.
3. Enter Destination MAC Address and Source MAC Address in the text box.
4. Select Frame Direction in the drop-down list for the rule.