Filter
Top Products
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
82
receiving the requested information and trap-event reports that are generated by the SNMP agent.
SNMP Manager is the third-party management system. Monitor one is an SNMP Manager.
Figure 4-105
¾ SNMP Agent: You can select the checkbox to disable or enable the function.
)
Note:
SNMP Community string provides a simple method of authentication between the Router (SNMP
Agent) and a remote network manager (SNMP Manager). You can specify the community string
as the password to authenticate the management station to the Router.
¾ Read Community: This field allows you to specify the SNMP Community string which
provides read-only access to the Router that the community is only permitted to read the
device configuration. The default value is “public”.
¾ Set Community: This field allows you to specify the SNMP Community string which provides
read and write access to the Router that the community has the authority to read and change
the device configuration. The default value is “public”.
¾ System Name: Enter alphanumeric string to specify an SNMP community string name. Your
Router (SNMP agents) will expose management data on the managed systems as this
"system name".
¾ System Location: The person to notify when problems occur.
¾ System contact: The location of the person that is identified as the system contact.
¾ Trap Manager IP: Enter the IP address of the SNMP Manager，where the SNMP Agent
forwards trap notifications.
Select the desired values and click Save/Apply to configure the SNMP options.
4.7.4 TR-069 client
Choose “Management”Æ“TR-069 client”, you can see the TR-069 client - Configuration screen
as shown below.
TR-069（WAN Management Protocol）allows a Auto-Configuration Server (ACS) to perform
auto-configuration, provision, collection, and diagnostics to this device.