loopback-detection recover
Description
The loopback-detection recover command is used to remove the block status
of selected ports, recovering the blocked ports to normal status,
Syntax
loopback-detection recover
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Recover the blocked port 2 to normal status:
TL-SG2424(config)# interface gigabitEthernet 1/0/2
TL-SG2424(config-if)# loopback-detection recover
show loopback-detection global
Description
The show loopback-detection global command is used to display the global
configuration of loopback detection function such as loopback detection global
status, loopback detection interval and loopback detection recovery time.
Syntax
show loopback-detection global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of loopback detection function:
TL-SG2424# show loopback-detection global
118