Filter
Top Products
ipv6 mld snooping vlan router-aging-time
Description
The ipv6 mld snooping vlan router-aging-time command is used to specify
router port aging time for a specified VLAN. If this time is set to 0, then the
global router port aging time will be used. The default time is 0. To restore the
default timer, please use no ipv6 mld snooping vlan router-aging-time
command.
Syntax
ipv6 mld snooping vlan vlan-id router-aging-time timer
no ipv6 mld snooping vlan vlan-id router-aging-time
Parameter
vlan-id —— The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
timer —— Aging time of the router port in seconds, ranging from 0 to 1000.
Command Mode
Global Configuration Mode
Example
Specify the router port aging time as 100 seconds in VLAN 2:
TL-SG2424(config)# ipv6 mld snooping vlan 2 router-aging-time 100
ipv6 mld snooping vlan member-aging-time
Description
The ipv6 mld snooping vlan member-aging-time command is used to specify
member port aging time for a specified VLAN. If this time is set to 0, then the
global member port aging time will be used. The default time is 0. To restore the
default timer, please use no ipv6 mld snooping vlan member-aging-time
command.
Syntax
ipv6 mld snooping vlan vlan-id member-aging-time timer
no ipv6 mld snooping vlan vlan-id member-aging-time
Parameter
vlan-id ——The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
timer —— Aging time of the member port in seconds, ranging from 200 to 1000
and 0.
Command Mode
Global Configuration Mode
174