Filter
Top Products
Command Mode
Global Configuration Mode
Example
Configure the gigabitEthernet 1/0/2 as static router port in VLAN 2:
TL-SG2424(config)# ipv6 mld snooping vlan 2 mrouter interface
gigabitEthernet 1/0/2
ipv6 mld snooping vlan static
Description
The ipv6 mld snooping vlan static command is used to configure the static
multicast groups. To disable the static multicast group, please use no ipv6 mld
snooping vlan static command.
Syntax
ipv6 mld snooping vlan vlan-id static ipv6_multicast_addr interface
gigabitEthernet port
no ipv6 mld snooping vlan vlan-id static ipv6_multicast_addr [interface
gigabitEthernet port]
Parameter
vlan-id —— The multicast group VLAN ID, ranging from 1 to 4094.
ipv6_multicast_addr —— IPv6 address of the static multicast group.
port —— Interface number of the member port(s).
Command Mode
Global Configuration Mode
Example
Configure the static multicast group ff80::1234 in VLAN 2 with the member port
gigabitEthernet 1/0/2:
TL-SG2424(config)# ipv6 mld snooping vlan 2 static ff80::1234 interface
gigabitEthernet 1/0/2
ipv6 mld snooping querier vlan
Description
The ipv6 mld snooping querier vlan command is used to enable the MLD
Querier function. To disable this function, please use no ipv6 mld snooping
querier vlan command.
176