Filter
Top Products
Choose the menu System →System Info →System Time to load the following page.
Figure 4-5 System Time
The following entries are displayed on this screen:
Time Info
Current System
Date:
Displays the current date and time of the switch.
Current Time
Source:
Displays the current time Source of the switch.
Time Config
Manual: When this option is selected, you can set the
date and time
manually.
Get time from NT
P
Server:
When this option is selected, you can configure the time zone
and
the IP Address for the NTP server. The switch will get time
from
NTP server automatically if it has connected to an NTP server.
Time Zone: Select your local time.
Primary/Secondary NTP Server: En
ter the IP Address for the
NTP server.
Update Rate: Specify the rate fetching time from NTP server.
Synchronize with
PC’S Clock:
When this option is selected, the administrator PC’s
clock is
utilized.
Note:
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.
4.1.4 Daylight Saving Time
Here you can configure the Daylight Saving Time of the switch.
16