The following entries are displayed on this screen:
Create Protocol Template
Protocol Name:
Give a name for the Protocol Template.
Ether Type:
Enter the Ethernet protocol type field in the protocol template.
Frame Type:
Select a Frame Type for the Protocol Template.
Protocol Template Table
Select:
Select the desired entry. It is multi-optional.
ID
Displays the index of the protocol template.
Protocol Name:
Displays the name of the protocol template.
Ether Type:
Displays the Ethernet protocol type field in the protocol template.
Frame Type
Displays the Frame type field for the protocol template.
Note:
The Protocol Template bound to VLAN cannot be deleted.
Configuration Procedure:
Step Operation Description
1
Set the link type for port. Required. On the VLAN →802.1Q VLAN →Port Config
page, set the link type for the port based on its connected
device.
2
Create VLAN. Required. On the VLAN →802.1Q VLAN →VLAN Config
page, click the Create
button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports.
3
Create Protocol Template. Required. On the VLAN →Protocol VLAN →Protocol
Template
page, create the Protocol Template before
configuring Protocol VLAN.
4
Create Protocol VLAN. Required. On the VLAN →Protocol VLAN →Protocol
VLAN
page, select the protocol type and enter the VLAN ID
to create a Protocol VLAN.
5
Modify/View VLAN. Optional. On the VLAN →Protocol VLAN →Protocol
VLAN page, click the Edit
button to modify/view the
information of the corresponding VLAN.
6
Delete VLAN. Optional. On the VLAN →Protocol VLAN →Protocol
VLAN page, select the desired entr
y to delete the
corresponding VLAN by clicking the Delete button.
6.4 Application Example for 802.1Q VLAN
Network Requirements
Switch A is connecting to PC A and Server B;
79