Filter
Top Products
••! •••••••
—Driver installation for Win 95/98/NT
! 13
8.
Select the desired IRQ Level, I/O Port Address and Con-
nection Type.
You must select an IRQ and I/O port
address that is not being used by ano-
ther device; otherwise, you will have a
system conflict error.
To see the available IRQ and I/O port
addresses, use the Windows NT Diag-
nostics program in Windows NT
Administrator tools. Refer to the Win-
dows NT online help for information on
Windows NT diagnostics.
9.
Click
OK
to continue. Windows will configure the Ether-
net Card. You are returned to the
Network
window.
10.
Click
Close
to exit the
Network
window. Windows NT
4.0 will bind the adapter with the network component.
When Windows NT is finished binding the adapter to the
network component, you are prompted to restart the system.
11.
Click
Yes
to finish the installation.