Filter
Top Products
••! •••••••
—Driver installation for DOS environments
! 21
Memory space select
Move the cursor to the desired memory space address and press
<Enter>. Available memory space addresses are D000H, D400H,
D800H, and DC00H.
CardBus 10/100Mbps Ethernet Card Installation Program
SELECTING A MEMORY ADDRESS
Please select the memory address that you would like your PCMCIA 10/100Mbps
Ethernet Card to use.
Use the up and down arrow keys to highlight the desired value. When a value is
highlighted press <Enter> to select it.
<Enter> to continue <F3> to return to DOS
D000H
D400H
D800H
DC00H
D400H
Manual installation
In most cases, the INSTALL program can make all system
changes necessary for using your PCMCIA 10/100 Mbps Ethernet
Card. However, in some cases, you may wish to make changes
manually. This section explains how to manually make driver and
file modifications to enable your card.
Enablers
You can use CARDGO.EXE to enable the PCMCIA 10/100 Mbps
Ethernet Card.
The CARDGO program
The program CARDGO.EXE communicates with the PC Card
controller of your computer. This program is needed only for
DOS environment network operating systems. You may install
the Socket and Card Services to your notebook before executing