Filter
Top Products
••! •••••••
—Driver installation for DOS environments
! 17
Press [Enter] to continue the installation.
The program prompts you for the directory where you want to in-
stall the driver files. You can choose the default directory name or
enter a new name. Then, press <Enter> to continue with the in-
stallation.
PCMCIA 10/100Mbps Ethernet Card Installation Program
ENTERING THE INSTALLATION PATH
INSTALL will create a directory with all of the necessary files to use the
PCMCIA 10/100Mbps Ethernet Card. Please enter the drive and directory
name, or confirm the default directory.
<Enter> to continue <F3> to return to DOS
C:\PCMCIA
The next screen asks if you want to do an Auto Configuration or a
Custom Configuration.
PCMCIA 10/100Mbps Ethernet Card Installation Program
SELECTING AUTO OR CUSTOM CONFIGURATION
To configure your PCMCIA 10/100Mbps Ethernet Card, you can select either
Auto Configuration or Custom Configuration. Using the Auto Configuration
option, the INSTALL program will automatically configure your PCMCIA
10/100Mbps Ethernet Card. Select Custom Configuration if the default
configuration does not work for you or if you want to specify the interrupt (IRQ),
I/O address, and memory address.
<Enter> to continue <F3> to return to DOS
Auto Confi
g
uration
Custom Configuration
Select
Auto Configuration
if you want to do a quick installation
and use the default configuration settings. If you wish to individu-
ally set any of the settings, then select
Custom Configuration
.