Filter
Top Products
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
16 !
5.
Insert the PCMCIA 10/100 Mbps Ethernet Card into the
PCMCIA socket (refer to page 3). Then attach the network
cable to the card.
6.
Restart your computer and connect to your network. If you
cannot connect to the network, refer to Appendix B and
Appendix C.
The Install program
Before you can use your PCMCIA 10/100 Mbps Ethernet Card,
you need to install and modify some files in your computer system.
You can make these changes manually, or you can let the
INSTALL.EXE program make them for you.
This section explains how you can use the INSTALL.EXE pro-
gram to install the enablers and the files needed by the network
operating system.
Using the Install program
To run the INSTALL.EXE program, follow these instructions:
At the DOS prompt type “INSTALL” and press [Enter]. You see
an opening screen, which welcomes you to the program and asks if
you wish to continue.
PCMCIA 10/100Mbps Ethernet Card Installation Program
DO YOU WANT TO PROCEED?
Welcome to the PCMCIA 10/100Mbps Ethernet Card Installation Program.
INSTALL will set up your PCMCIA 10/100Mbps Ethernet Card.
If your network operating system is installed, insert your PCMCIA 10/100
Ethernet Card in any available PCMCIA slot on your computer and press
<Enter> to continue.
Otherwise press <F3> to return to DOS.
<Enter> to continue <F3> to return to DOS