Filter
Top Products
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
24 !
Driver installation
The following sections cover installation of the client driver for
Windows NT 3.51, Windows for Workgroups 3.11, Netware
3X/4X, Microsoft LAN Manager, and Artisoft LANtastic Version
6.0.
Microsoft Windows NT 3.51
Follow these instructions to install the Microsoft Windows NT
3.51 client for your Ethernet Card:
1.
Insert the Ethernet Card into an available PCMCIA slot.
2.
Boot the computer.
3.
Click
Control Panel
in the main window and click the
Network
icon.
4.
Click
Add Adapter
. Pull down the adapter’s list and se-
lect
<other> Requires disk from manufacturer,
then
click
Continue
.
5.
Type “A:\winnt351” (where “A” is your floppy drive) and
click
OK
.
6.
Set the proper IRQ, I/O port, memory address settings, and
connection type for this card.
7.
Reboot the computer to complete the installation.