Filter
Top Products
44
After the configuration options have been selected, the USB flash drive which will
be used to configure the BlueFlyers unit needs to be selected. Be sure the USB
flash drive is plugged into an available USB port on the PC. If a USB device is
found that contains the proper directory structure that is used by BlueFlyers, then
it will be shown as selected. A different device can still be chosen. To choose a
device, click on the drive that corresponds to the USB flash drive which will be
used to configure the BlueFlyers unit. The Save button will be disabled until a
device is selected. The files currently stored on the selected USB flash
drive’s /private, /public, and /radio directories will be overwritten with the
new configuration information.