TRENDnet R91007G Network Card User Manual


 
53
The USB flash drive can be removed any time after the single long beep has
been played.
Time
The BlueFlyers’ time can be synchronized with an NTP server. To accomplish
this, connect the BlueFlyers unit to a network that has a DHCP server and an
Internet connection, and then boot the unit. The BlueFlyers unit will DHCP when
it boots. After booting, it will attempt to synchronize time over the network with a
public NTP server. When successful, the unit will play five short tones that
increase in frequency. Firewalls or lack of DHCP or DNS servers may prevent
the unit from being able to synchronize time.
The unit’s time zone can be configured using the BlueFlyers Wizard application.
Please refer to the software section for instructions on selecting a time zone.
A network connection is only required if time synchronization is necessary. It is
not needed for normal operation.