Filter
Top Products
TVP-221H User’s Guide
H.323 Parameters
For the most part end users will not be using these functions / features and / or
should use the default settings. For more information please see the Advanced
User Manuals or consult with your Systems Integrator
1.
Display Name: The default string is “Customer”.
This field is to set the display name information that is carried in the
H.323 setup messages. Up to 48 characters can be entered.
2. Terminal Type: The default value is 60.
This field is to set the H.245 terminal type, which is used as part of the
master/slave determination process of H.245. Typically, setting a value of
less than 50 will force slave operation, and a value of greater than 200 will
force the master operation. For more details, please refer to H.323-related
standard documents.
3. RTP Port Base: The default value is 30000.
This field is to select the starting port number for assignment of RTP and
RTCP ports. According to the H.323 specification, RTP port number
should be even in value, and the RTCP port number should be one greater
than the RTP port. Typically, numbers from 0 to 1023 are reserved on
most systems.
4. Outgoing Fast Start: The default setting is off.
This field is to enable or disable the Fast start mode on the outgoing side
of the link.
5. Incoming Fast Start: The default setting is off.
This field is to enable or disable the Fast start mode on the incoming side
of the link. You'll have to reboot the system to make your changes active!
Frame Rate = 2 frames/packet
6. Auto-Answer: Enables quick H.225 to H.245 transition without waiting
for receiver picking up the phone, default is on
28