Filter
Top Products
TVP-221H User’s Guide
48
in Taiwan (Local Area Code have 2 digits) and GW B is in the US (Local Area Codes
have 3 digits).
Gateway A, 4 ports, is configured as follows:
1. Gateway A IP: 192.168.1.20, mask IP: 255.255.255.0, gateway IP 0.0.0.0 (virtual
IP)
2. FXS Port 2 has a telephone set connected, its phone number is “203”
3. FXS Port 3 has a telephone set connected, its phone number is “204”
4. FXO Port 0 is connected to PBX. There are two telephone sets connected to the
PBX. Their extension numbers are “800” and “801”.
5. FXO Port 0 is registered as number “9” and it is connected to PBX
6. PBX has an external line to PSTN. Dialing “9” connects you PBX, where “9” is
dialed to connect to PSTN.
7. The PSTN number to reach the PBX is “8888-2222”.
8. Telephone A’s number is “7777-1234” and belongs to the local PSTN
Gateway B, 4 ports, is configured as follows:
1. Gateway B IP: 192.168.1.55, mask IP: 255.255.255.0, gateway IP 0.0.0.0 (virtual
IP)
2. FXS Port 2 has an analog telephone set connected, its phone number is “203”
3. FXS Port 3 has an analog telephone set connected, its phone number is “204”
4. FXO Port 0 is registered as number “9”. Dialing “9” connects you to the outside
line.
5. FXO Port 0 is connected to PSTN line “9999-3333”.
6. Telephone B’s number is “6666-4321” and belongs to the local PSTN.
Gateway A - IP setup:
1. Navigate to Internet Access / Fixed IP Menu
2. Type in IP Address: 192.168.1.20, Subnet Mask: 255.255.255.0 and Default IP
Gateway Address: 0.0.0.0 in the related fields.
3. Click on “Save”
4. Click on “Reboot”
Gateway B – IP Setup:
5. Navigate to Internet Access / Fixed IP Menu.
6. Type in IP Address: 192.168.1.55, Subnet Mask: 255.255.255.0 and Default IP
Gateway Address: 0.0.0.0 in the related fields.
7. Click on “Save”
8. Click on “Reboot”
Gateway A: Dial Plan Setup
FXS Ports to Analog Phones - Gateway A has two phones on the FXS ports.
Telephone number 203 on Port 2 and 204 on Port 3. These numbers are part of the
default dial plan and do not have to be entered. We can skip the local Dial Plan setup
including Telephone Address, hunt group and destination for phones 203 and 204.
How to Enter the Dial Plan
The Dial plan consists of three tables that include the Telephone Table, Hunt Group
(eg. Customer Service may have multiple phones that the GW must search through
for an open line), and Destination Table (Both Local and Remote). The dial plan has
to be entered into all Gateways so that the local gateway knows how to process calls,
sending them to its local ports or to remote gateways for further processing.