Filter
Top Products
TVP-221H User’s Guide
Telnet / Console
Web Configuration
Login to Site A TVP Gateway
From Console
1. Logon to the Web Configuration by
opening your browser
Enter Username “admin”
Enter Password “123”
Enter 192.168.0.20
2. You will be prompted for Username and
Password. Default Username and
Password are “admin” and “123”
respectively.
or from
Windows command prompt
Enter “telnet 192.168.0.20”
Enter Username “admin”
Enter Password “123”
Web Configuration of Dial Plan
atpm req
Dial Plan Settings / Dial Plan Table Setup
atpm aadd 22 5 5 22 2
3. Select “Add” and “Telephone
4. Enter following fields
a. Telephone Number: 22
b. Hunt Group ID: 22
76
c. Min. Digits: 5
d. Max. Digits: 5
e. Strip Length: 2
f. Append Prefix: none
5. Click on OK
Dial Plan Settings / Dial Plan Table Setup
6. Select “Add” and “HuntGroup”
atpm hadd 22 2 22
7. Enter following fields
a. Hunt Group ID: 22
b. Destination ID 0: 22
8. Click on OK
Dial Plan Settings / Dial Plan Table Setup
atpm dadd 20 h323 192.168.0.55
9. Select “Add” and “DestinationID”
10. Enter the following fields
a. Destination ID: 22
b. Hostname (or IP address)
192.168.0.55
atpm done
atpm store
c. Click on OK
Dial Plan Settings / Dial in PLAR/CID
set tcid 0 dial_in plar 22201
11. Enter 22201 in the PLAR Address Field
config activate
12. Click on OK
config store
Dial Plan Settings / Store Dial Plan
13. Click on Yes
Liness 3-12 create an
address entry for TVP
Gateway B
Lines 11-13 setup the hotline
(PLAR) from TVP Gateway A
to TVP Gateway B