Filter
Top Products
TVP-221H User’s Guide
Web Configuration of Internet Access
Internet Access / DHCP Client
24. Select “Yes”
25. Click on “Save”
Internet Access / Dynamic DNS
26. Select Enable
27. Enter Server Name, Host
Name, User Name, Password
(eg. dyndns.org tvp2
username2 password2)
28. Click on “Save”
29. Click on “Store”
Web Configuration of Dial Plan
Dial Plan Settings / Dial plan Table
Setup
30. Select “Add” and “Telephone”
31. Enter following fields
a. Telephone Number:11
b. Hunt Group ID: 11
c. Min. Digits: 2
d. Max. Digits: 5
60
e. Strip Length: 2
f. Append Prefix: none
32. Click on “OK”
Dial Plan Settings / Dialplan Table
From Windows command prompt
Enter “telnet 192.168.0.1”
Enter Username “admin”
Enter “123”
net set dhcp on.
net set dyndns on
set dyndns add [serv_name]
[host_name] [user_name] [password]
(eg. dyndns.org tvp2 username2
password2)
config activate
config store
atpm req
atpm aadd 11 2 5 11 2
From the local connection, you could
continue on setting up the dial plan.
However you could choose to reboot,
Once Internet Access is setup, you could
choose to reboot,
1. Click on “Reboot”
Connect your TVP-221H directly to your
ADSL / Cable Modem. Using a PC with
Internet Access, close all browser
windows, and then reopen your browser.
2. Enter tvp2.dyndns.org
3. You will be prompted for Username
and Password. Default Username and
Password are “admin” and “123”
respectively.
You would then continue as below:
Enter “net reset”
Enter “telnet tvp2.dyndns.org”
Enter Username “admin”
Enter “123”
connect your TVP-221H directly to
your ADSL / Cable Modem and
reconnect from a PC with Internet
Access
You would then continue as below: