TRENDnet TVP- 221H Network Hardware User Manual


 
TVP-221H User’s Guide
from the Internet.
IP Address
To manage this device via the Internet, you need to know the IP
Address of this device, as seen from the Internet. This IP Address is
allocated by your ISP. However, if you are using a Dynamic IP
Address, this value can change each time you connect to your ISP.
There are 2 solutions to this problem:
Have your ISP allocate you a Fixed IP address.
Use the DDNS feature (Internet menu) so you can connect using a
Domain Name, rather than an IP address.
To connect from a remote PC via the Internet using a web browser.
1. Ensure your Internet connection is established, and start your Web Browser.
2. In the "Address" bar, enter "HTTPS://" followed by the Internet IP Address of the TVP-
221H. If the port number is not 80, the port number is also required. (After the IP Address,
enter ":" followed by the port number.)
e.g.
HTTPS://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
Upgrading Firmware Using the Web Browser
Use this screen to upgrade your TVP-221H's firmware.
You must download the required firmware file, and store it on a TFTP Server.
During the upgrade process, all existing Internet connections will be terminated.
The upgrade process must NOT be interrupted!.
Data – Upgrade Firmware Screen
Upgrade Firmware
Upgrade File
Click the "Browse" button and browse to the location on your TFTP
Server where you stored the firmware upgrade file. Select this file.
TFTP Server IP
Enter the IP address of the TFTP Server.
41