Filter
Top Products
TVP-221H User’s Guide
72
Site A TVP Gateway configuration - FXO to FXS PLAR
Telnet / Console
Web Configuration
Login in to Site A TVP Gateway
From Console
Logon to the Web Configuration by opening
your browser
Enter Username “admin”
Enter Password “123”
1. Enter Wan IP xxx.xxx.xxx
Or if you are on the LAN,
192.168.0.20
or
2. You will be prompted for Username
and Password. Default Username and
Password are “admin” and “123”
respectively.
Windows command prompt
Enter “telnet xxx.xxx.xxx.xxx”
Enter Username “admin”
Enter Password “123”
Web Configuration of Dial Plan
atpm req
Dial Plan Settings / Dial Plan Table Setup
atpm aadd 22 5 5 22 2
3. Select “Add” and “Telephone
4. Enter following fields
a. Telephone Number: 22
b. Hunt Group ID: 22
c. Min. Digits: 5
d. Max. Digits: 5
e. Strip Length: 2
f. Append Prefix: none
5. Click on OK
Dial Plan Settings / Dial Plan Table Setup
6. Select “Add” and “HuntGroup”
7. Enter following fields
a. Hunt Group ID: 22
b. Destination ID 0: 22
8. Click on OK
Dial Plan Settings / Dial Plan Table Setup
9. Select “Add” and “DestinationID”
10. Enter the following fields
a. Destination ID: 22
b. Hostname (or IP address)
192.168.0.55
c. Click on OK
Dial Plan Settings / Dial in PLAR/CID
11. Enter 22203 into the PLAR Address
Field
12. Click on OK
Dial Plan Settings / Store Dial Plan
13. Click on Yes
atpm hadd 22 2 22
atpm dadd 22 h323 192.168.0.55
atpm done
atpm store
set tcid 0 dial_in plar 22203
config activate
config store
Lines 3-10 creates a zone
number (a number that tells the
ATPM to forward to a remote
destination) address entry in
TVP GW A for TVP GW B
Lines 11-13 Setup the
hotline (PLAR) from TVP
Gateway A to TVP Gateway
B