Filter
Top Products
TVP-221H User’s Guide
Web Configuration of Dial Plan
Dial Plan Settings / Dialplan Table Setup
4. Select “Add” and “Telephone
5. Enter following fields
g. Telephone Number: 22
h. Hunt Group ID: 22
i. Min. Digits: 2
j. Max. Digits: 5
k. Strip Length: 2
l. Append Prefix: none
6. Click on “OK”
Dial Plan Settings / Dialplan Table Setup
7. Select “Add” and “HuntGroup”
8. Enter following fields
m. Hunt Group ID: 22
n. Destination ID 0: 22
9. Click on “OK”
Dial Plan Settings / Dialplan Table Setup
10. Select “Add” and “DestinationID”
11. Enter the following fields
o. Destination ID: 22
p. Hostname (or IP address)
tvp2.dyndns.org
q. Click on “OK”
Dial Plan Settings / Store Dial Plan
12. Click on “Yes”
atpm req
atpm aadd 22 2 5 22 2
atpm hadd 22 2 22
atpm dadd 22 dns tvp2.dyndns.org
atpm done
atpm store
Changes to network settings require rebooting to take effect.
Changes to the Dial Plan do not and will take effect as soon
as they are stored.
Caution: If you do not store the dial plan, it will be lost
when you reboot.
Note: After changing the default IP address, you will be
required to use the new IP Address (hostname), in this
example, 192.168.0.20 to gain access from the local LAN
segment or tvp1.dyndns.org, to gain remote access via the
Internet.
TVP-221H configuration (cable connection) on site B
Telnet / Console
Web Configuration
Local (from PC in same Segment)
Console
68