Filter
Top Products
3.7.3 Super I/O Configuration Sub-Menu
You can use this screen to select options for the Super I/O
settings. Use the up and down arrow (Ç/È) keys to select an item.
Use the Plus and Minus (+/-) keys to change the value of the
selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Configure Win627 Super I/O Chipset
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
Chassis Intrusion Detect
Watchdog Mode
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
[Disabled]
[Disabled]
Allows BIOS to enable
or disable Floppy
Controller.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
Configure Win627 Super I/O Chipset
3F8 IRQ4
3E8 IRQ4
2E8 IRQ3
Serial Port1 Address
Disabled
Allow BIOS to select Serial Port1 Base
Addresses.
2F8 IRQ3
3F8 IRQ4
2E8 IRQ3
Serial Port2 Address
Disabled
Allow BIOS to select Serial Part2 Base
Addresses.
Normal
IrDA
Serial Port2 Mode
ASK IR
Allow BIOS to select mode for Serial Port2.
Disabled
Chassis Intrusion
Detect
Enabled
Enable/Disable the function of chassis
intrusion detection. When chassis open
event is detected, BIOS will record the
event.
Disabled
2 Minutes
4 Minutes
6 Minutes
8 Minutes
Watchdog Mode
10 Minutes
Watchdog Timer sets 2/4/6/8/10 minutes.
When WD time-out occurs, system will
auto reboot.
44