Filter
Top Products
28
User mode settings
>Bend Remedy>
>Retransfer>
>>Media Type
>>Temp. Level
>>Speed (Front)
>>Speed (Back)
Std(1000/roll):0
+1(High)
+2(Fast)
+2(Fast)
Standard
(1000/roll):0
Standard
+1
+2
+2
Off
+2
None
0
0
0
SKY BLUE
Off
Standard
Hi-Co
On
Total
>>Temp. Level
>>Speed
>>Cooling Time
Off
+2(Fast)
None
>Ink>
>>Ink Type
>>Black Level
YMCK:0
0(Standard)
>>Black Mode
>>SP-Ink1 Level
Standard
0(Standard)
>>SP-Ink2 Level
0(Standard)
>Display>
>Power Saving
>>Counter
>>Contrast
>>Back Color
Total
0(Standard)
SKY BLUE
>Cleaning>
>Card Thickness
>MG ISO Type
>Buzzer
>Transport mode
>Counter Reset
Off
Standard
Hi-Co
On
OK?
OK?
>IC Antenna Pos.
None
>IC Contact Pos.
None
>Test Print
OK?
>>MG Print(JIS)
Off
Off
>Unit No:
No.1
No.1
>>Standby mode
Front Wait
Front Wait
Main menu
Submenu
Factory setting
Display mode
Ink mode
Retransfer mode
Bend Remedy
mode
4 counter type settings: [Total, Head, Free, Rollers]
LCD panel contrast setting: 7 gradations from –3 to +3, the higher
the value the stronger the contrast.
LCD pamel background color setting: 8 options
See p. 29
See p.31
See p. 32
See p. 34
See p. 30
See p. 30
See p. 33
See p. 33
See p. 34
See p. 35
See p. 35
See p. 35
See p. 35
Counter reset mode
For free counter resetting: press the ENTER button.
Cleaning mode
For cleaning mode setting: Magnetic head and card feeder roller execution
Display on ink ribbon : the ink type being used is displayed
Display only because of automatic setting by RF-ID(Setting is not possible)
Setting the black value K: 9 gradations can be set from –3 to +5, the
larger the value the darker the printing.
Setting the K printing mode: 2 options [standard and fine]
Setting the retransfer film:
setting the film type
[1000,750] - two types
Setting the retransfer roller temperature:
6 gradations can be set from –3 to +2,
the larger the value the higher the
temperature.
Setting the retransfer speed: 13 gradations can be set from –10 to +2,
the larger the value the faster the speed.
Setting the rear retransfer speed: 13 gradations can be set from –10 to +2, the
larger the value the faster the speed.
Buzzer mode
Setting the buzzer ON/OFF: 2 settings [on
and off]
Power saving mode
Setting the time for the power saving mode:9 options [off, 5, 10, 15, 20, 25, 30, 45 and
60] (units: minutes)
Bend remedy roller temperature setting: 7 gradations can be set from –5 to 0 or
off, the larger the value the higher
the temperature.
Bend remedy speed setting: 5 gradations can be set from –2 to +2, the
larger the value the faster the speed.
Cooling time setting: 16 gradations can be set: none and 1–15 (units
seconds).
Card tickness setting mode:
Card thickness setting: 2 options [Standard,Thin]
Coercivity setting mode:
ISO card coercivity setting: 2 options [Lo-Co
and Ho-Co]
Non-contact IC antenna setting mode:
Non-contact IC antenna position setting: 3 options [None, Ext. Unit, Added on]
IC contact position setting mode:
IC contact position setting: 3 options [None, Built-in, Ext. Unit]
Test print mode:
to carry out test printing: press the ENTER button.
Setting the special ink SP-Ink 1, SP-Ink2 darkness:
9 gradations can be set from –3 to +5, the larger the value
the darker the printing.
Transfer Mode:
Transfer mode setting: press the ENTER button.
See p. 35
Setting the way of peeling off the retransfer film:
2 settings [On and Off]
See p. 35
Unit No: 7 options [No.1 to No.7]
Unit No. setting: press the ENTER button.
Stand by selection: In case of both side printing with optional unit connected,
select either one of the card sides for standby.2 Settings[Front Wait,Back Wait]
Operation (continued)