Uniden BC245XLT Scanner User Manual


 
2. Press and hold for
about two seconds.
You will hear two
beeps when all the
channels have
been restored.
Priority Scan
When Priority Scan is turned on, your scanner checks the
priority channel every two seconds for activity. If a signal is
present on the priority channel, your scanner monitors the
channel until the transmission ends, then resumes normal
scanning. You can designate one channel in each bank as
a Priority Channel.
To activate Priority Scan (in either the Manual or
Scan Mode):
1. Press .
Note: If you have
locked out the priority
channel, this message
appears when you
select Priority mode.
2. Press
again at anytime to
deactivate Priority
Scan.
26
12345678910
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:02:10 1999
Color profile: Disabled
Composite Default screen