Filter
Top Products
SmartScanner software. Run this program and it should
automatically set the port setting for you (although you can
override the settings). Make sure that you have a phone
line plugged into the modem jack on the back of your PC
and your scanner is connected to the serial port of the PC
using the supplied cable.
To use the Remote (PC Control) mode, you must purchase
third party software and use as directed. Make sure that
your scanner is connected to the serial port of the PC using
the supplied cable.
Scanner to External Modem
Plug the smaller end of the supplied RS232C cable into the
remote port which is on the right side of the scanner.
Plug the other end of the cable (DB-9 serial connector) into
the external modem. You may need a DB-9 to DB-25 null
modem adapter, available at most computer stores. Of
course, make sure your external modem is turned on.
Make sure that you have a phone line plugged into the
modem jack on the back.
Scanner to Scanner
Plug the smaller end of each of the supplied RS232C
cables into the remote ports which are on the right sides of
each of the two scanners.
Plug the other ends of the cables (DB-9 serial connector)
together using a DB-9 to DB-9 null modem adapter,
available at most computer stores.
63
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:05:07 1999
Color profile: Disabled
Composite Default screen