Uniden BC245XLT Scanner User Manual


 
You can also enter or display EDACS talk groups in
decimal format (0-2047). Just press and hold to switch
the scanner between AFS and decimal mode. But you
cannot use XPAND when in decimal mode.
You can program a specific talk group such as 01-011 into
Scan List memory, or, with AFS mode, you can program
the talk groups for an entire agency (there may be
hundreds) by pressing, for example:
01, , (all 01 groups will be scanned)
Or you can program all the talk groups within one fleet of
an Agency by pressing, for example:
01, , 01, (all 01 talk groups within the 01
Agency will be scanned)
You can also “Blockout” a large number of talk
groups by pressing after entering an Agency or
an Agency and Fleet into memory. This is a very
powerful feature!
Note: In AFS mode, Agency numbers range from
00 through 15.
If you prefer to view and program talk groups in “decimal”
mode, press and hold for two seconds while in an
EDACS trunking bank and the display method will change.
It will stay changed until you press and hold again for
two seconds while in EDACS operation. Decimal mode will
not work with partial talk groups entered in AFS mode into
Scan List memory.
For further details and examples, please see the Appendix.
51
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:04:48 1999
Color profile: Disabled
Composite Default screen