Filter
Top Products
37
Programming Bank
Information
In addition to channel and trunking system information you
program into each bank (covered in the following sections),
this section covers general bank information.
Bank Configuration
Each of your scanner’s banks holds 100 channels that can be
a mix of conventional (non-trunked) channels and one
trunking system. Bank 1 holds Channels 001-100, Bank 2
holds Channels 101-200, and so on through Bank 0 which
holds Channels 901-1000.
Additionally, each bank that includes a trunking system can
also hold up to 100 Talkgroup ID’s for that system.
Assigning Bank Names
To give a bank a name that the scanner displays when it
stops on a channel in that bank:
3:SYSTEM OPTION → 9:BANK TAG
1. Use the scroll bar to select the bank you want to tag, then
press E.
2. Use the scroll bar to select the letter, then press RSM to
move the entry position one space to the right or press
HOLD/MAN to move the entry position one space to the
left.
3. When you have entered the tag, press E to save the tag
and return to Step 1.
BC296D(NEW) 10/16/03 6:35 PM Page 37