Uniden BC296D Scanner User Manual


 
Changing the Frequency Step
2:SCAN OPTION 1:CONVENTIONAL
Channel No. 6:STEPS
The channel frequency step option controls the frequency
step size used when you manually tune up or down from the
frequency stored in the channel. Your BC296D is
preprogrammed with the most common steps sizes for each
band, so you seldom need to change this setting.
1:5KHz
Use 5 kHz steps
2:6.25KHz
Use 6.25 kHz steps
3:7.5KHz
Use 7.5 kHz steps
4:10KHz
Use 10 kHz steps
5:12.5KHz
Use 12.5 kHz steps
6:25KHz
Use 25 kHz steps
7:50KHz
Use 50 kHz steps
8:100KHz
Use 100 kHz steps
9:AUTO
Automatically set the step size based on the band
Setting the Modulation Mode
2:SCAN OPTION 1:CONVENTIONAL
Channel No. 7:MODE
Radio transmissions are modulated in several different ways.
The BC296D is able to demodulate the most common
transmission types. Your scanner has the most common
modulation mode preset for each band, so you seldom have
to change this option. However there are occasional services
that use a modulation mode that is not standard for that band.
1:AM
Amplitude Modulation
2:FM
Frequency Modulation
3:WFM
Wideband FM
43
BC296D(NEW) 10/16/03 6:35 PM Page 43