Filter
Top Products
104
Notes:
• Turn on this setting if you are near other strong
signal sources. Attenuation sometimes helps to
reduce interference and desensitization that
strong signals create.
• Even if ATT appears, attenuation might not work if
the bar antenna is turned on and the tuned fre-
quency is from 0.1 to 1.7 MHz.
• Search with Scan - sets whether the scan-
ner includes the service search during scan-
ning. If unlocked, the scanner first scans all
selected systems, then searches the selected
service searches for the selected hold time
(0-255 seconds).
Notes:
• You can also lock and unlock a search range by
pressing , selecting the search range then
pressing + L/O.
• If you select 0, the scanner searches the entire
range one time.
• The default setting is 2 seconds for each
search range.
• The scanner moves to the next system or
search range after the hold time expires, any
current transmission ends, and the channel
delay time expires.
Auto Search and Store
Your scanner’s Auto Store feature lets you search for
new frequencies in custom search ranges or within a
service search range on a conventional system, or
new talk group ID’s on a trunked system.
Note: You cannot use Auto Search and Store to select
racing systems or EDACS SCAT systems.
Func
Func