Filter
Top Products
57
Other Settings
Hint: If you have trouble transferring data between
your scanner and your computer, try setting the baud
rate to a slower setting.
Use the included connection cable to connect your
scanner to another BR330T scanner or your personal
computer.
Settings
PC Control
PC Control Lets you set the baud rate your scanner
uses to communicate with a personal computer.
• Off The baud rate is not set.
• 9600 bps The baud rate is set to 9600 bps.
• 19200 bps The baud rate is set to 19,200 bps.
• 38400 bps The baud rate is set to 38,400 bps.
• 57600 bps The baud rate is set to 57,600 bps.
• 115200 bps The baud rate is set to 115,200 bps.
Using the Cloning Options
Lets you set your scanner as a master (source) or
slave (recipient), letting you transfer programming to
or from another BR330T scanner. See “Wired Cloning”
on Page 57 and “On-Air Cloning” on Page 58.
Wired Cloning
Xfer Information
Wired Clone
• Master Sets the scanner to be the source scanner.
• Slave Sets the scanner to be the recipient scanner.
To clone (copy) data directly from one BR330T
scanner to another BR330T scanner, you must first
connect the scanners to each other using the included
connection cables and a DB9 null modem adapter and
DB9 gender changer (neither included), available at
most computer stores. Then you must set one scanner
as the source and the other as the destination.
Plug the smaller end of each of the included connection
cables into Remote on the right side of each scanner.
Menu
Menu