Filter
Top Products
12
If you lock out a system or group, any channels
belonging to that system or group are also locked out.
You can lock out up to 200 frequencies and review all
locked-out frequencies. The scanner skips locked-out
frequencies while using the Close Call feature or while
searching.
CTCSS and DCS Squelch Modes – prevent interfer-
ence from stations not using the mode you select.
Fire Tone-Out Standby – Lets you set the scanner to
alert you if a two-tone sequential page is transmitted.
You can set up to 10 settings (transmit frequency, tone
frequencies) then select one for standby monitoring.
Broadcast Screen – Sets the scanner so it ignores
Close Call
TM
or search hits on known broadcast
frequencies including pager frequencies.
Custom Screen – Lets you input up to 10 frequency
ranges that the scanner will ignore during Close Call
TM
or search operation.
Dropout Delay – You can set whether the scanner pauses
at the end of a transmission to wait for a reply. You can
set the delay time for each system you scan, and while
searching and using the Close Call
TM
feature.
Built-In Bar Antenna – Lets you clearly listen to AM
radio broadcasts.
Attenuator – You can set the scanner’s attenuator to
reduce the input strength of strong signals by about 18 dB.
Repeater Reverse – You can set the scanner so it
switches to the input frequency on a conventional
repeater system.
Channel Alert – You can set the scanner so it alerts
you when there is activity on any channel you specify.
Memory Check – Lets you see at a glance how much
total memory is left.
Scan and Search Operation – Lets you include
selected service searches or custom search ranges
during normal scan operation.