Filter
Top Products
77
Programming Radio Systems
• See “Setting the System Hold Time” on Page 82
• See “Editing the System Quick Key” on Page 81
• See “Setting the Channel Delay Time” on Page 82
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 83
• See “Reviewing Locked Out Frequencies” on
Page 111
• See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 96
• See “Deleting Systems” on Page 88
• See “Copying Systems” on Page 89
• See “Setting System Frequencies” on Page 77
• See “Entering/Editing LTR Channel Groups” on
Page 77
Setting System Frequencies
Program System
Select the system
Set Frequencies
New Frequency
Input a system frequency, then press the scroll control.
The scanner then prompts you to enter the LCN for
the entered frequency. Enter the LCN, then press the
scroll control.
To enter additional frequencies, press , use the
scroll control to select New Frequency, then repeat
the above.
Entering/Editing LTR Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Menu
Menu