Filter
Top Products
74
The scanner creates an empty EDACS system, with a
default name of System n E.
n is a number that increments as you add new
systems. E indicates that this is an EDACS system.
Next, refer to the appropriate section to set system-
wide options. For most settings, you can accept the
default. However, for the items in bold, you must enter
information in order for your scanner to scan the
system.
• See “Editing the System Name” on Page 80
• See “Editing the System Quick Key” on Page 81
• See “Setting System Lockout” on Page 81
• See “Setting the System Hold Time” on Page 82
• See “Setting the Channel Delay Time” on Page 82
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 83
• See “Setting I-Call (Motorola and EDACS Sys-
tems Only)” on Page 85
• See “Setting the EDACS ID Format (EDACS Sys-
tems Only)” on Page 87
• See “Reviewing Locked Out Frequencies” on
Page 111
• See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 96
• See “Deleting Systems” on Page 88
• See “Copying Systems” on Page 89
• See “Setting System Frequencies” on Page 74
• See “Entering/Editing EDACS Channel Groups”
on Page 75
Setting System Frequencies
Program System
Select the system
Set Frequencies
New Frequency
Menu