Filter
Top Products
49
Using the Menu
Using the Menu
The scanner’s menu lets you select options that let you
set up and use the scanner.
To use the menu, press on the left side of the
scanner. To select a menu item, rotate the scroll control
clockwise or counterclockwise. The currently-selected
menu item is highlighted with a bar on the display. When
the menu item you want to select is highlighted, briefly
press the scroll control to select it. To back up a level,
press . To exit the menu mode, press again or
the L/O key.
This table shows the scanner’s menu structure. To find
information about a particular menu setting in this
manual, go to the page number shown in parentheses
next to the setting.
Note: Not all of the options shown in this table may
appear at the same time. To view all available options on
any screen, rotate the scroll control.
Menu Item Submenu
Menu
Menu Menu
-- M E N U --
Srch/CloCall Opt
Search for ...
Program System
Select System
Alameda Conv
Alameda MOT
(51)
Arlington MOT
-- M E N U --
Search for ...
Program System
Srch/CloCall Opt
Srch/CloCall Opt
Srch/CloCall Opt
Broadcast Screen
CTCSS/DCS Search
Repeater Find
Max Auto Store
Set Delay Time
Set Modulation
Set Attenuator
Set Data Skip
Set Step
(95) (114)
Freq Lockouts
(111)
(112)
(100)
(113)
(114)
(115)
(114)
(115)
(116)
-- M E N U --
Search for ...
Program System
Srch/CloCall Opt
Search for ...
Srch/CloCall Opt
Edit Service
Custom Search
Edit Custom
Search and Store
Service Search
(99)
(103)
(102)
(101)
(105)
Using the Menu